It looks like you're new here. If you want to get involved, click one of these buttons!
I get a lot of the same errors. But my biggest problem is it keeps kicking back that my PID isn't valid for extended PIDs. Because of this, it won't let me save.
Custom naming is also a must. There generic list has a lot of options, but not all the ones I need.
New update fixed it, working great now, thanks for the quick turnaround as usual!
Does the app support pulling info from another module such as the BCM? Forscan is able to see tire pressure and other PIDs from the BCM so I know it's possible just need to do more digging. I have the PID and equations but I'm guessing theres additional prefix or something that is needed to access the module. Need to do more digging.
This stuff is a little over my head but the provided info is the BCM is.....
Transmitter ID: 726
Receiver ID: 72E
Then the PIDs for each tire pressure sensor is 222813-222816.
Ford Focus ST Ecoboost correct.
So maybe I am dense, but I am having no luck configuring my custom pid for my BRZ for Oil Temperature. In Torque this works, but once I try to set it up in RaceChrono it shows an error. Can anyone explain where I am going wrong?
OBD2 Mode and PID: 2101Minimum Value: -40
Maximum Value: 215
Scale factor: x1
Unit type: C
Equation: AC-40 (no space between A and C; "AC" is the location within the response)
OBD Header: 7E0
Thanks (and apologies for the massive screenshots)....
Did the suggested solution for this - using “A-40” work for you?
@aol Just did a quick test, seem It work fine. I'll do some track test next sunday.