Hi,
I am developing a custom interface that emulates an OBD interface, and I'm trying to make racechrono work with it. (
https://github.com/fpoussin/MotoLink)
I've tested the said interface with a couple scantool softwares, it worked fine.
I've also tested the adapter (ELM327 via BT) on my car with racechrono and it worked fine as well.
So I know both my adapter and my interface are working.
When using the adapter on my interface I only get requests on PID 0 (which are answered) and the message "waiting for data..."
I never get the requests for the PIDs I selected. (TPS, etc)
I am wondering what kind of data racechrono is expecting.
Thanks.
Comments
It keeps asking for PID 00 only.
Which supported PIDs is it expecting from PID 00?
Maybe I missed something, I'll run some more tests.
I suspect you got the bit order wrong or something, so it thinks the ones you selected are not supported. Or the response format is not correct. You can also adjust the expert settings to ignore this PID, so it will request the ones you selected anyways.
Thanks!
This is the traffic I see on the CAN bus:
->[SID:7DF][RTR:0]:02:01:00:00:00:00:00:00
<-[SID:7E8][RTR:0]:06:41:00:10:18:80:01:00
All good now. Thanks!