Hello, I want integrate any Value for analyse with ODBII appaired ;
- Lean angle (real, not simulated)
- Brake presure
- Rear brake pressure
- Shifter Position
- Drift %
I shearch on any forum and i phone to Motorrad but i can't give this.
Anyone have working for integrated a new equation (PiD + raw value). Please for this fabulous Rachrono ?
Thanks for your help !
Comments
Hi.
Therese is an Excel document where the pids with Formula discribed.
Take a Look maybe it will help
https://docs.google.com/spreadsheets/d/1tUrOES5fQZa92Robr6uP8v2dzQDq9ohHjUiTU3isqdc/edit#gid=1756716432
Anyone can make a program line for this can bus Please ?
https://www.aimtechnologies.com/support/docs/Solo2+Solo2DL+EVO4S_per_BMWS1000RR_101_eng.pdf
For a good calculation in RC you need following informations:
The PID where the information is stored: A unique number of the channel
For example: 0x21
In this Channel are 8 bytes which stores the information of your bike
for example: 125-141-2-13-5-10-244-255
After that you need to know which byte is responsible for which information
For example the 3th byte is responsible for the Gear -> In this case 2
In some cases the values are stored with a formular in the byte:
Example for a BMW S1000RR K 46
Value: Throttle Position
Channel: 10C
Formular in Document: (DEC(D6) / 255) * 100
Formular in RC:
https://racechrono.com/support/equations
(bytesToInt(raw,6,1) / 255.0) * 100