Hello,
i use RaceDAC with RaceChrono and i want to log the RPM Signal.
Unfortunately, RaceDAC does not support RPM pickup by induction at the ignition cable directly. You need a extra module for converting that induced RPM signal into something RaceDAC can read.
Where do i get such a plug'n'play module?
Comments
You need some kind of adapter which picks up the signal from ignition cable, and then gives 0-5V pulse to RaceDAC.
But no answer if there is a pnp module.
Anybody else an idea?
This adapter is for "traditional" ignition systems where spark plug is connected with spark plug (high voltage) wire to coil, distributor or magneto.
http://racedac.com/rpmadapter.html
http://racedac.com/