OBD2 Data Aprilia Tuono arpc connect

hey,

i use racechrono pro without obd2 data. i want to integrate the data from an aprilia rsv4 (2016) ...

https://www.amazon.com/gp/product/B00652G4TS/ref=as_li_tl?ie=UTF8&tag=scanneransw0a-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B00652G4TS&linkId=80934328e4e5d3b30ebacb71523c8dd3

is this product useful and does it do the trick? do i need an adapter to connect the ecu?

any experiences and hints are welcome!
best, xir

Comments

  • Unfortunately that reader is not currently supported. Also I'm not sure if you can connect to Apprilia RSV4 using OBD-II. Sorry for the lack of hard facts, but usually bikes do not support OBD-II.
  • there are lots of bikes supporting obd2 as far as i found out ...
    hm ... i will ask aprilia
  • The OBD link LX Adapter is working with the RSV4
    http://www.obdlink.com/
    It reads RPM, AFR, Throttle, Temperature etc...
    I used it with RSV4 RF MY 2017
  • edited July 2018
    Yep, even my new KTM 790 supports OBD-II. Just needed to by the cable from https://www.lonelec.co.uk . Custom PIDs are under works so you'll be able to extract those also in the coming updates.
  • @actionmatz: this sounds great. i give it a try.
    did you need an extra cable for it? which one?

    thanks a lot!
  • @actionmatz can you share some photos of your setup?

Sign In or Register to comment.