Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

How do I add min/max speed to the video overlay?

I recently came over to RaceChrono from Harry's Laptimer and one of the things I liked about HLT is that the video overlay showed you the min speed in all the corners and max speed on all the straights. Like the min/max speed shown on the map in the linked pic below. How get those values to show up on the video overlay?

Also, the map seams to show the GPS speed value, how can I change it to OBD2? I'd also like the video overlay to use the OBD2 value.

https://i.imgur.com/vLfGqHc.jpg

Comments

  • aolaol
    edited August 19
    Min/max cannot currently be shown in the video overlay.

    Also min/max flags or the colour on the map cannot be changed to OBD-II values. This has been on my TO-DO forever so maybe I should finally do it as the data engine now allows it.

    The overlay can be edited from the "Edit overlay..." menu item on the video player tools. You can change the speedometer channel from GPS to OBD-II.
  • Any chance I can convince you to put the min/max as an option for the video overlay on your to do list as well? Along with a gear indicator...?

  • Min/max is already on my TO-DO. There is already a gear indicator, but there's no "calculated channel" for the gear (RPM against speed). So it can be only used with custom OBD-II / CAN-Bus channels...
  • How do I overlay the gear indicator? Or any other OBD-II channel thats not one of the 6 default options that show up under OBD-II channels?

  • aolaol
    edited September 25
    It needs to be added as a custom OBD-II channel. Basically you'd need to know which PID is it on your car (and the other parameters), or if it has it at all, as these are different on every car.
Sign In or Register to comment.